1958 TESTA ROSSA REPLICA

We would have loved receiving the assignment to build this aluminum bodied car but we didn't. It's too bad because we would have done a better job. Instead we received the car for service because the engine was making a metallic noise and it ran on no more than 6 of its 12 cylinders. We fixed all that but found problems with the suspension, the steering, the cooling system, the ignition system, the throttle linkages, the electrical system, body to chassis alignment, the paint, the wheels and tires, etc, etc. This car needed major sorting and re-engineering but it now runs and drives beautifully.

When first built she apparently had a vintage Ferrari V12 engine but that was replaced with a Jaguar V12 equipped with Electromotive computer controlled fuel injection and distributorless ignition and TWM throttle bodies, before we received the car, in an attempt to make the car more user friendly. Unfortunately none of this equipment had been set up properly, which is why it wasn't running right (I imagine the carburetors and distributors on the original Ferrari engine weren't set up correctly either). The metallic noise had made us wonder if the engine had a loose valve seat, or something like that, but after removing a cylinder head the cause turned out to be a piece of copper wire lying on top of a piston and making contact with the head. Not having air filters, the engine apparently just sucked the copper wire in. Luckily it didn't do any serious damage.

Murcielago wheels, dash

We powder coated the wheels black. We like the new look.

Powder coating is a great process yielding stunning results for wheels and all kinds of parts.

Leather dashes shrink, unfortunately. Here the black leather on the dash had shrunk along the forward edge at the base of the windshield, leaving sections of the yellow structure underneath showing. It obviously did not look very nice that way. We removed the dash (not a simple task) and it was clear that not enough leather was left folded over the edge and glued down when the car was built. We sewed large leather patches onto the skimpy tabs left by the factory, both to have something to pull on and to have more leather surface area to glue down to the back of the dash. We soaked the outer dash leather, stretched it, pulled it back over the edge, glued it all down and re-installed the dash. The result was a few stretch marks in the leather on top of the dash but it looks 99% better than it did. We could have installed new leather but the car's owner didn't want to go that far and was very happy with the result.

THREE VINTAGE FERRARI ON A FALL AFTERNOON

This photo was taken as the center car, a 1965 Ferrari 330 GTS, was about to be loaded into the trailer for the trip back to it's owner. This is a really nice car for cruising around on a sunny fall day. It's not too big and not too small - a nicely sized traditional sports car with plenty of power from it's 4 liter V-12 and nice handling. It's a real pleasure to drive and to behold. I guess it's market value reflects that.

The 330 GTS was in for an annual service. On the road test we noticed a slight hesitation in the brakes. The car was raised on a lift and one of our technicians applied pedal pressure while another tech checked the brakes over and found a big bulge in the right front brake hose. New brake hoses were installed and off she goes.

The Ferrari on the right is a 1963 250 GT Berlinetta Lusso (luxury coupe). It is basially a road going version of the 250 GT Berlinetta SWB (short wheel base) competition car and is one of the prettiest Ferraris ever made. It's a nice little car with a 3 liter V12 and early disk brakes. Unfortunately it's a bit cramped for my 6' - 2" frame but that's not the car's fault.

The Lusso is in our shop for some work on the fuel system, cooling system, steering and electricals and is about ready to go home also.

The silver Ferrari on the left is a 1975 365 GT4 BB (Berlinetta Boxer) It has a horizontally opposed 12 cylinder engine which is the reason for the Boxer name since the two banks of pistons move back and forth, towards and away from each other like boxing gloves in a fight. This is considered the first mid-engine Ferrari. The 246 Dino came before it but at the time the Dino was considered a separate brand by Ferrari management. This was a fast car in it's day and is still no slouch. I'm told this car was actually displayed on the Ferrari stand at the International Auto Show in the old Coloseum. I think the CNN building stands there now but I remember many exciting trips to the Coloseum to see the latest offerings.

This car is here for a partial restoration and is very close to completion.

Waiting

This 1959 Jaguar XK 150S roadster was found in a barn in Texas, with a bullet hole in the windshield. Now spot free from rust and protected in primer, it waits. Has been waiting in our barn in NJ for 8 years for restoration work to resume.










How much longer before it looks like this?


I heard that Clint Eastwood had one of these too in the early '60s (probably without the bullet hole).


- posted by Sandy

Happy ending for burned Lamborghini Diablo

We are in the final stages of a 3-year reconstruction of a Lamborghini Diablo roadster which suffered an engine fire. Originally a silver car, the engine was toast and all rear body panels, hoses, wiring, etc melted. Now with new metal flake yellow paint, rebuilt engine, restored frame, we are just performing a final service. We can't wait to send this car home.

Garden State Ferrari Festival

Before September turns into October, here are photos from this year's Garden State Ferrari Festival, held September 14 in Florham Park. We were there (2nd to last photo, lower right; note my new Ferragamo handbag!) with our black 1978 supercharged Euro Ferrari 308GTB (last photo).

There were about 200 Ferraris, from Enzo, to late model and vintage models. The facilities for a show like this are great - 4 tiers of blacktop and good landscaping - all the cars looked their best. The weather was hot for mid September - but better sun than rain.

Despite the allure of marvelously restored older Ferraris (a 1961 250PF Cabriolet took Best in Show and numerous other awards), my personal favorite was a 430 Spyder painted an unusual tropical orange/red. (5th photo) Tamale red? What do I know, I just know what I like!

Note: these photos were posted at the exoticsrally.com forum and reposted here with the photographer's (Brent Mathews) permission. More photos can be found on this thread at Exotics Rally: We didn't bring our cameras, just strolled around enjoying the day. Fun.

Many thanks to Dave North of the Penn-Jersey branch of the Ferrari Club of America for painstakingly organizing once again a hugely successful occasion for Ferrarista.

- posted by Sandy

1952 Aston Martin DB2 hits the road

Aston Martin, the company, has been hand building cars for discerning buyers and winning races since the early twentieth century. The DB models came after World war II when Aston Martin was bought by David Brown. The most famous Aston Martin is probably the DB5 driven by James Bond in the mid sixties.

This beautiful DB2, built in 1952, came to our shop a few years ago needing some repairs but as we started working on it one frightening thing after another was uncovered. Part of the chassis had rusted away, every bearing journal on the crankshaft was a different size, every single spoke in the wire wheels was loose, the bonnet (hood) had been crash damaged and badly repaired several times apparently (requiring extensive aluminum body panel fabrication) and the list went on.


She runs and looks like new now and it's easy to forget the challenges we ran into along the way. For example, this car has 3/16" flat glass in the doors. New windows were required and usually we have flat windows cut from safety glass from a local supplier. Apparently 3/16" safety glass is no longer available. Quarter inch wouldn't fit so we tried 1/8" but as soon as we started road testing the thin glass started cracking. The only other choice was 3/16" tempered glass (like the original equipment) but having tempered glass windows made is a bit more complicated. New windows were cut and sent out to be tempered (for strength) and one exploded in the oven. Later when we finally had the new side windows in our possession, one of them had been made a hair too wide and would not fit. Safety glass could have been trimmed on a special belt sander at the glass shop but that is a no no with tempered glass. It shatters into a million little pieces. Lucky for everyone we were able to make adjustments inside the door.


Radial tires, electronic ignition (Pertronix retro fit kit in the distributor) and a Bosch coil were trade-offs to make this classic more fun to own. The wood rim, aluminum steering wheel is also not original but adds a nice touch to the interior.

The lazy speedometer was fixed with some judicious cleaning and a drop of real whale oil in the right place.

Arnolt Bristol @ Buckingham Auto Show

Here's a few photos of a customer's award winning 1954 Arnolt Bristol last weekend at the Buckingham Auto Show Concours d'Elegance. Here is a blurb about the Arnolt Bristol from Sports Car Market Magazine:

"The Arnolt Bristol was the obsession of engineer, industrialist, importer, and sports car enthusiast Stanley “Wacky” Arnolt. He made his fortune building marine engines during World War II, and, seeing a market for sports cars in America during the early 1950s, cut a deal with Bristol to use an updated version of its 400 chassis, designated the 404, to build a sports car. Bertone supplied the bodies, and the Arnolt Bristol went into production in 1954. The racing version, called the “Bolide,” did not come with a top, carpeting or adjustable seats, and windshield wipers were optional. “DeLuxe” models had all of those features and a different dashboard design with the instruments in front of the driver. A coupe completed the model line-up, though just six were built before production ended in 1961. Only 142 Arnolt Bristols were constructed in total, 12 of which were destroyed in a Chicago warehouse fire. An estimated 75 cars survive to this day...."


Here is the background of the Buckingham Auto Show from their website. This mid-September annual show is worth a visit :

" The Buckingham Auto Show is the brain child of Al Pincus and Ralph Tompkins, who became concerned with the loss of farm land and open space in Buckingham Township.
They presented their idea of an antique auto show and dinner annually to raise funds to purchase farmers development rights to the Board of Supervisors five years ago.
The show has been a huge success, manned totally by volunteers and the Fund has been recognized by both the State and Federal Governments and granted status as a Pennsylvania charity and a Federal 501(c) 3 tax free entity."



Posted by Sandy

NJ Motorsports - FUN DAY!

We had an awesome time yesterday at the brand spanking new NJ Motorsport Park in Millville, NJ . Organized by the relatively new tri-state based Exotics Rally About 100 exotic car owners turned out for this charity run from Edgewater NJ to south Jersey to tour the phenomenal new raceway, so new the grass hasn't even started growing. Here are a few pics from the day. Visit the exoticsrally.com website for more and info on how to participate in future events.

Following a snail's pace tour of the new Thunderbolt track the guys had their jollies doing some blood thirsty go karting at NJMP (see last pic of Wil behind the wheel getting ready to wreck havoc).

Car shows are fun too, but these cars are meant to be driven and we certainly had fun in our vintage supercharged 308GTB alongside new Murcielagos, Gallardos, some Diablos and a host of Ferrari, Porsche, Lotus, Corvettes, BMW, Bentley, Acura and Vipers.

Posted by Sandy

2008 Belle Macchine d'Italia at Pocono

2008 Belle Macchine d'Italia at Pocono. Check out this blog for an interesting write up and veeerry nice photos of this year's event.

Ferrari Club 'Spring Fever Run'

We drove our 1977 308GTB 70 miles to gather with 25 other Ferrari owners for a late March drive up to High Point State Park. Anyone else have spring fever?

One of our latest projects is this 1960 Fiat Abarth with a hand made aluminum body by Zagato. I flew to France last spring for a long time client to perform a PPI (pre-purchase inspection) on this car and actually rode around in the streets of Paris with this car. Our client was able to negotiate a purchase after the inspection and the little car arrived at our shop in Frenchtown NJ a few months later by sea container.

The car had been refurbished in the not too distant past so it didn't need a so called "frame off" total restoration. The exterior re-paint was actually not bad, over-all, but several areas of the body showed signs of swelling under the paint. Removing paint and filler from the offending areas revealed pin holes in the aluminum, caused by galvanic corrosion between the aluminum skin and the steel skeleton. These pinholes had been filled with polyester body filler during the previous work. This is a no-no since polyester filler will absorb moisture if it is not completely sealed front and back. The filler was pulling in moisture from the back-side and swelling up.

To avoid damaging the minimal upholstery inside, the whole interior was removed.

(Post by Wil de Groot)

Hello Paul

We welcome Paul Weinberger, our new fabricating guru. Paul has an expert background in restoring vintage racecars: Bugatti, Ferrari, Maserati, Alfa Monza, Miller, Pre-War MGs, Allards, Pebble Beach contenders and other vehicles with provenance. But can he blog...?

Paul is putting the finishing touches on the Aston Martin DB2. We're just waiting for all the refinished chrome pieces to be reinstalled and then the car will be on its way home.

Goodbye Randy....

We said goodbye to Randy Tartanian, who penned the majority of our blog since its inception in late 2005. Future blogging will be by Wil or Sandy de Groot. Thanks for your good words, Randy, and good luck.